|
DIRECTIONS
McCulloch Generation V
HID Kit Install with Harness.
| Step
1: |
| Unpackage
the HID Kit carefully, and prep the kit for install.
|
| Step
2: |
| Disconnect
your battery and attach the harness to the battery,
the connections shown below are the ones which attach
to the battery. The red wire is the positive
connection and the black is negative connection.
|
| Step
3: |
| Remove the
stock Halogen bulbs from your car and replace them
with the HID bulb. (You might have to make a hole in
to your dust cap, to allow the wires to get through if
you have a dust cap). |
| Step
4: |
| Attach
the Ballast to the harness connection just like it is
shown below.
|
| Step
5: |
| Attach the
igniters to the ballast just like it is shown below.
|
| Step
6: |
| Attach
the bulb wires to the igniter connections, just like
shown below.
|
| Step
7: |
| Attach the
final connection from the harness to your stock wiring
connection (the one which was attached to the halogen
bulb originally). |
| Step
8: |
| Check
wiring to make sure all connections are secure and
safely move the wiring so that it does not touch or
come in contact with any hot or moving parts of the
vehicle. Please use the zip-ties provided in the
package. |
| Step
9: |
| Mount
ballasts along a safe part of the car, we recommend
using an alcohol pad to clear the area and the use the
provided double sided tape to secure the ballast
against the area which you choose.
Make sure the bulb is securely
in and make sure it is covered with its dust cap (if
applicable). |
*Some car
may require more work than others.
If you have any
questions please e-mail us: hidplacedotcom@aol.com.
|
